Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
E1352A
Keysight/Agilent E1352A, 1 Slot, B Size, Register-Based, 32-Channel Single-Ended FET Multiplexer
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Keysight/Agilent E1352A 32-Channel Single-Ended FET Multiplexer
The Keysight E1352A 32-Channel Single-Ended FET Multiplexer is used to provide fast switching performance for advanced VXI testing domains. It uses a 1-slot B-size register-based architecture for compact instrumentation integration.
The E1352A can be used with digital multimeters to scan up to 13,000 channels per second while testing. During automated acquisition procedures the downloaded scan lists further aids to deliver switching speeds up to 100,000 switches per second. The unit has dedicated pathways internally for voltage current and resistance measurements.
The input voltage ranges for the DC input between the terminals or chassis are 16 V peak at controlled operating conditions, and no instability problem is encountered. For repetitive acquisition procedures, the maximum current level for each non-inductive channel common is a maximum of 1 mA without any reliability concerns.
The E1352A FET multiplexer has a differential thermal offset of less than 25 mV between 0 °C and 28 °C. While in service, the closed-channel resistance of less than 3.1 k-Ohms maintains a stable signal transfer between connected instrumentation interfaces. The insulation resistance between isolated points reaches 10E8 ohms, supporting dependable electrical isolation throughout precision testing procedures continuously. Guard-to-chassis insulation resistance maintains 10³ ohms with ±10% tolerance during integrated measurement system operations reliably.
The power-off insulation resistance exceeds 1 k-Ohms when input voltage levels remain below 14 V during operation. It remains above 220 Ohms when input voltage levels exceed 14 V during operation. The field-effect transistor relays provide consistent switching stability during repetitive automated testing procedures requiring reliable channel management. The break-before-make relay architecture prevents channel engagement during high-speed switching sequences.
The E1352A Multiplexer maintains open FET states during complete power-down conditions for system protection reliability. It initializes with open FET pathways during startup sequences, preventing unintended signal routing issues. The relay lifespan remains unlimited under unloaded operating conditions, supporting continuous deployment in testing.
The P1 connectors provide interfacing between external instrumentation systems and installed multiplexer circuitry during operational integration procedures. The shared memory resources remain unnecessary because register-based communication manages operational data transfer requirements efficiently during testing.
| Model | E1352A |
|---|---|
| Manufacturer | Keysight/Agilent |
| Part Type | 32-Channel Single-Ended FET Multiplexer |
| Channel Capacity | 32 Channels |
| Module Size | 1-Slot B-Size |
| Scanning Rate | 13,000 channels/s |
| Switching Speed | 100,000 switches/s |
| Maximum Channel Current | 1 mA non-inductive |
| Maximum DC Voltage | 16 Vpk |
| Maximum AC Voltage | 16 Vrms |
Associated part numbers for E1352A:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
