J2900A

Request for Availability

Keysight/Agilent J2900A, Dual-Port, Hot Swappable Modules, High Speed Undercradle

Rated 4.9/5  |  18 ratings

❮ ❯

Actual item may vary if no part number is provided on quote request.

Keysight Agilent HP - Protocol Analyzers and Exercisers - J2900A
Keysight Agilent HP - Protocol Analyzers and Exercisers - J2900A - Wiring
J2900A New
J2900A Refurbished

✔ 2 Year Warranty Included

✔ Free Domestic Ground Shipping

✔ NIST Calibration Available

Request a Quote

Get Price & Availability for the J2900A

Fast response from an Apex Waves specialist.

Fast Response Avg. 15 min
ISO 9001 Quality 2 Year Warranty
Check Availability Get Current Lead Time

Keysight/Agilent J2900A High Speed Undercradle

The J2900A from Keysight/Agilent High Speed Undercradle is an additional capability that extends the Keysight Advisor LAN protocol analyzer family of products by offering full-bandwidth WAN and ATM test capabilities. As such, it is able to be attached to either the J3446C/D or J2300C/D mainframes, thus enabling the simultaneous two-port observation of all handshake and delay events associated with network handshakes and all negotiation events between devices on the network. Additionally, the undercradle will support all of the major plug-in modules available for the product line. In doing so, this will provide a single, common platform for identifying and verifying the integrity of complex data transmission paths. Engineers may capture and record both unidirectional and bi-directional flow of information in real time while analyzing their networks. This means that no event may be missed. The modular design of the product enables simple add-on expansion in the field, thus allowing field engineers to easily adjust their test configuration as needed.

The slide-in modules for the J2900A are capable of covering the ISDN (BRI and PRI), T1, E1, E3, DS3, J2, ATM25, and STM-1/OC-3c interfaces. Once populated, the system will capture and completely decode Frame Relay, X.25, HDLC, SDLC, SNA, synchronous and asynchronous PPP, and ATM-DXI traffic. The undercradle will interpret LAN protocols encapsulated over WAN circuits, which allows a total picture of both bridged and routed communications between remote sites. Field engineers utilize the undergrade to verify serial or TDM-based SCADA links, remote telemetry units, and point-to-point inter-facility connections. The J2900A has a fast response time for isolating faults using real-time protocol decodes.

Operating at speeds from 50 bps through 52 Mbps, the J2900A can accommodate many legacy serial interfaces as well as T1/E1 leased lines. When used with the Advisor mainframe, the J2900A provides the user with detailed protocol decodes, BER testing, and real-time statistical reporting to enable documentation of SLA compliance. Since each module can be swapped out individually when necessary, this modular design minimizes capital expense. Also, since there is no need to replace entire analyzers for changing topology requirements, this enables easy migration to newer technologies as well as easier deployment of new broadband backhaul systems. By combining WAN and ATM test functionality within a single portable instrument, this simplifies maintenance operations for both field service personnel and Network Operations Center (NOC) staff.

J2900A Technical Specifications
ModelJ2900A
Part TypeWAN/ATM Undercradle
ManufacturerKeysight
Legacy ManufacturerAgilent
Compatible MainframesJ3446C/D, J2300C/D
Data Rate Coverage50 bps – 52 Mbps
WAN Protocol DecodesFrame Relay, X.25, HDLC, SDLC, SNA, PPP, ATM-DXI, encapsulated LAN
Line Interface ModulesISDN, T1, E1, E3, DS3, J2, ATM25, OC-3c
Simultaneous AnalysisDual-port on J2300C/D
ATM CapabilityATM-DXI, ATM25, DS3/E3 ATM, OC-3c
Physical IntegrationUndermount to mainframe
Module FlexibilityHot-swappable modules

Associated part numbers for J2900A:

Delivery:

Free FedEx or UPS Ground shipping is offered on domestic orders. Expedited and international options are available; shipping other than domestic ground is customer-paid.

View shipping and delivery policy

All of our products are covered by our Apex Waves Warranty.

✓ 3 Year Warranty - New Surplus Parts

✓ 2 Year Warranty - Refurb / Fully Tested Parts

Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.

View returns policy or submit a return request.

Payment:

Authorize.net Visa Master Card American Express Truist icon logo Better Business Bureau Dun & Bradstreet

Receive Price & Availability Today!

Ask About Our Tiered Calibration Levels

Option & Modules:

Confirm Your Requirements or Versions

Cost & Lead Time Available Upon Request for Service

Repair Evaluation: $150

Share this page:

Common Typos:

K2900A, M2900A, J2I00A, J2O00A, J2P00A

Why Buy From Apex Waves:

Video thumbnail for Apex Waves Unboxing Experience Video