Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Keysight/Agilent P9370A, 2 Ports, 50 Ohms Port Impedance, Streamline USB Vector Network Analyzer
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Keysight/Agilent P9370A Streamline USB Vector Network Analyzer
The Keysight/Agilent P9370A Streamline USB Vector Network Analyzer operates at a radio frequency of 4.5 GHz. For RF measurements, it operates as a two-port benchtop device with a frequency range of 300 kHz to 4.5 GHz. For a thorough sweep setup, it supports a frequency resolution of 1 Hz to 2 Hz. The VNA unit uses two 50 Ohm ports for impedance-based measurements. Its port connector options include 3.5 mm female SMA female and SMB female interfaces. The network analyzer provides dynamic range performance from 95 dB to 122 dB across supported measurement conditions. The unit offers output power from 0 dBm to 10 dBm. Its power sweep range extends from -40 dBm to 7 dBm for level-dependent testing.
The USB VNA achieves a measurement speed of 24 msec for fast acquisition during automated procedures. It also supports a sweep speed of 14 ms for efficient frequency-domain analysis. The model includes an IF bandwidth setting of 10 Hz. This bandwidth supports low-noise measurements when the test setup requires improved trace stability. The network analyzer has a noise floor from -108 dBm to -98 dBm across specified conditions. The performance identifies low-level responses during sensitive device network and component measurements with practical accuracy. Directivity ranges from 31 dB to 52 dB for reflection measurement accuracy at calibrated ports. The harmonic level is specified from -10 dBc to -6 dBc during supported output operation. This specification helps users assess source purity during RF stimulus and response testing.
The P9370A analyzer operates through a USB 3.0 interface. The connection enables compact setup integration with supported Windows-based control computers and measurement software. The analyzer requires Windows 7 or Windows 10 in a 64-bit working environment. It supports systems using an Intel i5 sixth generation processor or newer hardware. The supported workstation may also use an Intel Xeon E3 v3 processor or newer platform. The VNA requires a display resolution of at least 1024 x 768 pixels. The unit operates from 0 Degree C to 55 Degree C during specified environmental use. The unit is powered through a 15 V rear panel DC connector supply. The P9370A model by Keysight/Agilent is also applicable for aerospace and defense testing that requires portable RF network analysis. It supports S-parameter analysis across its architecture for transmission and reflection evaluation.
| Model | P9370A |
|---|---|
| Manufacturer | Keysight |
| Legacy Manufacturer | Agilent |
| Part Type | Streamline USB Vector Network Analyzer,4.5 GHz |
| Frequency Range | 300 kHz to 4.5 GHz |
| Number of Ports | 2 Ports |
| Port Impedance | 50 Ohms |
| Frequency Resolution | 1 Hz to 2 Hz |
| Measurement Speed | 24 ms |
| Output Power | 0 dBm to 10 dBm |
| Directivity | 31 dB to 52 dB |
Associated part numbers for P9370A:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos: