785562-01 Request for Availability

National Instruments 785562-01 Oscilloscope Probe

Part Number 785562-01 is the identifying part number for the National Instruments CC30100X Oscilloscope Probe. The 785562-01 has a -3 dB bandwidth ranging from DC to 100 MHz. The rise time for the probe is 3.5  ns or less.The maximum continuous input range is 30 Arms while the maximum peak current value is non-continuous 50 A. Similarly, the amplitude accuracy is ± 1.0% rdg. ± 1 mV to 30 Arms and ±  2.0% rdg. to 50 A peak. Furthermore, the output voltage rate is 0.1 V/A.The noise is equivalent to 2.5 mA rms or less for a 20 MHz band measuring instrument. Moreover, the maximum rated voltage is 300 V, CAT I. 

The 785562-01 also has a maximum rated power of 5.3 VA while the supply voltage is ±12 V ±0.5 V. The effect of external magnetic fields is equivalent to 5 mA or less, for DC and 60 Hz input at a magnetic field of 400 A/m. Furthermore, the temperature coefficient of sensitivity is ±2 % rdg or less during input of 50 Hz 30 Arms within the operating temperature range. 

The 785562-01 is recommended for operation between temperatures of  0 °C to 40 °C at a relative humidity of 80% or less. Additionally, it should only be used inside and should not be used above 2000 meters. On the other hand, it can be stored between  -10 °C to 50 °C at the same level of relative humidity. The probe's accuracy is guaranteed for a year, accounting for up to 10,000 openings and closings.

The diameter of measurable conductors for the 785562-01 is 5 mm. The length of the sensor cable is approximately 1.5 m while the length of the power supply cable is 1 m. The probe weighs approximately 240 g and comes with an instruction manual and a carrying case. In terms of physical dimensions, the sensor measures 175W×18H×40Dmm (approx.) while the terminator measures 27H×55W×18D mm (approx.). It conforms with EN61326 EMC and EN61010 safety requirements.