783729-01 Request for Availability

National Instruments 783729-01 C Series Voltage Input Module 

National Instruments part number 783729-01 is an identifying part number for the NI-9209, a C Series Voltage Input Module with 32 Single-ended Analog Input Channels and 16 Differential Analog Input Channels. This Voltage Input Module is equipped for versatile connectivity, featuring a D-SUB connector on the front panel and 60 VDC Ch-Earth Ground Isolation.

Both the CompactDAQ and CompactRIO platforms are compatible with the 783729-01. The open embedded CompactRIO platform has a high level of resilience and is small in size. With NI LabVIEW, it is easily adaptable and straightforward to use. The CompactRIO platform allows this module to perform customized timing and triggering and supports processing with a wide range of existing I/O. This enables users to meet any requirement for embedded applications. The NI 783729-01 has a maximum sample rate of 500 S/s and an analog input resolution of 24 bits. Each channel has a maximum input voltage range of up to ±10 V. 

This Voltage Input Module features built-in noise rejection capability, able to reject noise up to 50/60 Hz. It can be configured to reduce the number of active modules as needed. Do not connect this module with DSUB to signals or use it for measurements within Measurement Categories II, III, or IV, or on MAINs circuits or circuits derived from Overvoltage Category II, III, or IV, which may have transient overvoltages. Only transients up to its transient overvoltage rating can be tolerated by the DSUB connected NI 783729-01 without causing insulation breakage or damage. Before making measurements, analyze the working voltages, loop impedances, temporary overvoltages, and transient overvoltages in the system.