NI-9215

In Stock | Ships Today

NI-9215, BNC / Screw / Spring Connector Options, 4 Analog Inputs, Voltage Input Module

Rated 4.7/5  |  10 ratings

❮ ❯

Actual item may vary if no part number is provided on quote request.

NI-9215 NI Voltage Input Module | In Stock Ships Today | Image
NI-9215 NI Voltage Input Module | In Stock Ships Today | Image
NI-9215 New
NI-9215 Refurbished

✔ 2 Year Warranty Included

✔ Free Domestic Ground Shipping

✔ NIST Calibration Available

Request a Quote

Get Price & Availability for the NI-9215

Fast response from an Apex Waves specialist.

Fast Response Avg. 15 min
ISO 9001 Quality 2 Year Warranty
In Stock Ships Today

National Instruments NI-9215 C Series Voltage Input Module

The NI-9215 (Part number(s): 779011-01, 783739-01, 779138-01)  is a C series voltage input module that comes in 3 different forms based on the type of front connector and safety rating. Part number 779011-01 has a screw terminal connector and 250 V RMS channel to earth ground isolation CATII with a 2300 RMS standoff for 5 sec. Part number 783739-01 has a spring terminal connector and 250 V RMS channel to earth ground isolation CATII with a 2300 RMS standoff for 5 sec. Part number 779138-01 has a BNC connector and provides a 60 V DC channel to earth isolation CATI with a 1500 rms standoff. The NI-9215 is a compacted module with an enclosure, is non-conformal coated, and supports the CompactRIO and CompactDAQ systems.

The NI-9215 can sample 4 differential analog inputs simultaneously using a separate track and hold amplifier for each channel and a 16-bit SAR A/D converter. The input signals are conditioned and buffered before being converted into digital form. Some of the key specifications of this device include a nominal input range of ±10.0 volts, an input bandwidth of at least 420 kHz, a common mode rejection ratio of at least 73 dB at 60 Hz, and a maximum error of 0.2% of reading or 0.082% of range within the operating temperature range of –40°C to +70°C. The input impedance is at least 1 g-ohm AI to COM for screw and spring terminal versions and at least 200 k-ohms between any two AI terminals for the BNC version. The module also has ±30 volt over-voltage protection.

Maximum sample rates for this unit are as follows: up to 100 ksps per channel with all four channels sampling. It also comes with NIST traceable calibrations that occur every year. Power consumption when powered from the chassis is as follows: up to 560 mw active power consumption and up to .025 mw during sleep. The environmental ratings for this module are as follows: an operating temperature range of –40°C to +70°C, a storage temperature range of –40°C to +85°C, and IP40 ingress protection. This Voltage Input Module is supported in the following programming languages: LabVIEW, SignalExpress, Visual C++, and Visual Studio.

NI-9215 Technical Specifications
ModelNI-9215
ManufacturerNational Instruments
Part Numbers779138-01, 783739-01, 779011-01
Part TypeC Series Voltage Input Module
Analog Input Channels4 Differential
Maximum Sample Rate100 kS/s per Channel
ADC Resolution16 Bits
Front Connector OptionsBNC, Spring Terminal, or Screw Terminal
Supported HardwareC Series
Simultaneous Sampling?Yes
Enclosed?Yes
Conformal Coated?No
Overvoltage Protection±30 V
ADC TypeSAR: Successive Approximation Register
Channel-to-Earth IsolationScrew/Spring: 250 V RMS; BNC: 60 V DC
WeightBNC: 6.1 oz; Screw Terminal: 5.3 oz; Spring Terminal: 4.9 oz.
Input Voltage Range±10.0 V
Input Bandwidth420 kHz Minimum (-3 dB)
NI-9215 ManualUser Manual and Maintenance Manual Available for Download
PriceRequest a Quote for Pricing

Associated part numbers for NI-9215:

National Instruments NI-9215 Frequently Asked Questions

 

Question: What is the sample rate of the NI-9215?

Answer: The sample rate is 100 kS/s for every channel.

 

Question: How many of the analog input channels of the NI-9215 are single ended?

Answer: This module does not have any single-ended analog input channels, but there are four differential analog input channels.

 

Question: What is the input impedance of the NI-9215?

Answer: The input impedance is 1 GΩ for the screw-terminal and spring-terminal versions of the module and 200 kΩ for the BNC version.

 

Question: Where can I find other specifcations for the NI-9215 specifications?

Answer: Manuals and datasheets from the manufacturer can be freely downloaded from the "Manuals & PDFs" tab.

Delivery:

Free UPS Ground shipping is offered on domestic orders. Expedited and international options are available; shipping other than domestic ground is customer-paid.

View shipping and delivery policy

All of our products are covered by our Apex Waves Warranty.

✓ 3 Year Warranty - New Surplus Parts

✓ 2 Year Warranty - Refurb / Fully Tested Parts

Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.

View returns policy or submit a return request.

Payment:

Authorize.net Visa Master Card American Express Truist icon logo Better Business Bureau Dun & Bradstreet

Receive Price & Availability Today!

Ask About Our Tiered Calibration Levels

Option & Modules:

Confirm Your Requirements or Versions

Cost & Lead Time Available Upon Request for Service

Repair Evaluation: $150

Share this page:

Common Typos:

BI-9215, GI-9215, JI-9215, NU-9215, NI-9Q15

Why Buy From Apex Waves:

Video thumbnail for Product Demo: NI-9215