SH96F-96M-42V Request for Availability

National Instruments SH96F-96M-42V Shielded Cable

The shielded cable SH96F-96M-42V (Part Numbers: 158228-01, 158228-03, 158228-05) from National Instruments is intended to be used with the PXIe-4304/5 to Rackmount Terminal Block. It has a 60 VDC maximum operating voltage that can be applied to any pin to any pin.

There are 24 pairs of wires in the cable: pairs 1 through 20 are shielded-twisted pairs of 28 AWG, pairs 21 and 22 are shielded-twisted pairs of 22 AWG, and pairings 22 through 24 are shielded-twisted pairs of 28 AWG. For the outside shield, the shielding consists of braid with 85% coverage and foil for the inner shield. The cable comes in lengths of 1 meter, 3 meter, and 5 meter, with corresponding weights of 1,187 g, 2,040 g, and 2,894 g for each length.

It is equipped with 96-pin Type R DIN 41612/IEC 60603-2 male and female connectors. It operates between 0°C and 55°C in the ambient temperature range, meeting the MIL-PRF-28800F Class 2 high temperature limit and Class 3 low temperature limit. With a maximum altitude of 2,000 meters and a Pollution Degree of 2, the cable is appropriate for indoor use. For storage, the ambient temperature range is -40°C to 71°C, with a relative humidity range of 5% to 95%, noncondensing.

It withstands operating shocks up to 30g peak, half-sine, 11ms pulse, and random vibrations in the range of 5 Hz to 500 Hz, 0.3g rms during operation, and 2.4g rms in non-operating conditions. Safety compliance includes IEC 61010-1, EN 61010-1, UL 61010-1, and CSA 61010-1 standards for electrical equipment used in measurement, control, and laboratory environments.