SCC-SG02 National Instruments Strain Gage Module | Apex Waves | ImageSCC-SG02 NewSCC-SG02 | Legacy, Refurbished and New Surplus
SCC-SG02 National Instruments Strain Gage Module | Apex Waves | Image
SCC-SG02 New
SCC-SG02 | Legacy, Refurbished and New Surplus

SCC-SG02

4.7/5 | 9 ratings

Modular Systems > National Instruments > SCC

Part Number SCC-SG02
Manufacturer/Brand National Instruments
Description: SCC-SG02, 350 Ohm quarter-bridge, Strain Gage Module
Request for Availablility
Fast Quote
Quoted Price
Same Day Calibration Available
2-3 Year Warranty Included
Free Ground Shipping
  Get Pricing

Need an Official Quote?

 

Or speak to a sales representative for additional information:


National Instruments SCC-SG02 Strain Gage Module

Designed for Quarter-Bridge configuration, the NI SCC-SG02 (Part Number: 777459-14), is a 350 Ω Strain Gage Module. This module allows you to take quarter-bridge configuration strain measurements with elevated accuracy and precision. This Strain Gage Module comes with integrated signal conditioning and an excitation source. You can use this module with a multifunction I/O device, an SCC carrier, and an appropriate cable. The NI SCC-SG02 has two differential channels. Each channel has a dedicated instrument amplifier, a lowpass filter, and a potentiometer. The lowpass filter is a 1.6 kHz filter that ensures precise measurements in noisy industrial environments.

This module has an integrated 2.5 V excitation source as well. The National Instruments SCC-SG02 contains one 350 Ω quarter-bridge completion resistor per channel. This Strain Gage Module has socketed resistors. Thus, you can easily replace the resistors when required. With this module, you can easily scale voltage signals to different strain units automatically with the help of software. Manual conversion of voltage signals is also possible with the help of relevant conversion equations. The SCC-SG02 can receive analog signals within a range of -100 to +100 mV.

Each channel of this Strain Gage Module operates under integrated overvoltage protection. In the powered-on state, the module operates with 10 MΩ input impedance at 1 µVrms input noise and 1.6 kHz bandwidth. The NI SCC-SG02 requires 143 mW of analog power while operating on analog power. The module draws around 42 mA of current at +5 VDC while operating on DC power.

SCC-SG02 Obsolete Status has been announced by National Instruments, but the module will still be available for purchase and repairs by Apex Waves.

ModelSCC-SG02
ManufacturerNational Instruments
Part Number777459-14
SeriesSCC-SG Series
TypeStrain Gage Module
Channels2
Designed for350 Ω quarter-bridge configurations
Fixed Gain100
Dimensions3.50 in. × 1.15 in. × 0.73 in.
Weight37 g.
Warranty2-3 Year Warranty
SCC-SG02 ManualUser Manual and Maintenance Manual Available for Download
PriceContact a sales representative for a quote.

Why Buy From Apex Waves:

Apex Waves Youtube Video

"The business transaction was super easy and friendly."


"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"


"They were very helpful to get me the test equipment that I need."



Delivery:    
UPS, FedEX and DHL – Free Ground on all orders
Overnight, Next Day Air or Expedited shipping options available
International delivery available
Same day shipping for in-stock on location
Warranty: All of our products are covered by our Apex Waves Warranty.
3 Year Warranty - New Surplus Parts
2 Year Warranty - Refurbished Parts
Returns: No hassle return policy.
Dedicated customer service team.
Payment: Authorize.net Visa Master Card American Express BB&T Better Business Bureau Dun & Bradstreet
Quick Quotes: Receive Price & Availability Today!
Calibration: Ask About Our Tiered Calibration Levels
Option & Modules: Confirm Your Requirements or Versions
Repair: Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Share this page: Facebook Icon Twitter Icon LinkedIn Icon
Common Typos: XCC-SG02, SVC-SG02, SCS-SG02, SCC-SG0W, SCC-SG0E

SCC-SG02



SCC-SG02
4.7/5 | 9 ratings

SCC-SG02, 350 Ohm quarter-bridge, Strain Gage Module

Request for Availablility
Same Day Calibration Available
2-3 Year Warranty Included
Free Ground Shipping
  Get Pricing

Call now for best pricing
1-800-915-6216

National Instruments SCC-SG02 Strain Gage Module

Designed for Quarter-Bridge configuration, the NI SCC-SG02 (Part Number: 777459-14), is a 350 Ω Strain Gage Module. This module allows you to take quarter-bridge configuration strain measurements with elevated accuracy and precision. This Strain Gage Module comes with integrated signal conditioning and an excitation source. You can use this module with a multifunction I/O device, an SCC carrier, and an appropriate cable. The NI SCC-SG02 has two differential channels. Each channel has a dedicated instrument amplifier, a lowpass filter, and a potentiometer. The lowpass filter is a 1.6 kHz filter that ensures precise measurements in noisy industrial environments.

This module has an integrated 2.5 V excitation source as well. The National Instruments SCC-SG02 contains one 350 Ω quarter-bridge completion resistor per channel. This Strain Gage Module has socketed resistors. Thus, you can easily replace the resistors when required. With this module, you can easily scale voltage signals to different strain units automatically with the help of software. Manual conversion of voltage signals is also possible with the help of relevant conversion equations. The SCC-SG02 can receive analog signals within a range of -100 to +100 mV.

Each channel of this Strain Gage Module operates under integrated overvoltage protection. In the powered-on state, the module operates with 10 MΩ input impedance at 1 µVrms input noise and 1.6 kHz bandwidth. The NI SCC-SG02 requires 143 mW of analog power while operating on analog power. The module draws around 42 mA of current at +5 VDC while operating on DC power.

SCC-SG02 Obsolete Status has been announced by National Instruments, but the module will still be available for purchase and repairs by Apex Waves.

ModelSCC-SG02
ManufacturerNational Instruments
Part Number777459-14
SeriesSCC-SG Series
TypeStrain Gage Module
Channels2
Designed for350 Ω quarter-bridge configurations
Fixed Gain100
Dimensions3.50 in. × 1.15 in. × 0.73 in.
Weight37 g.
Warranty2-3 Year Warranty
SCC-SG02 ManualUser Manual and Maintenance Manual Available for Download
PriceContact a sales representative for a quote.

Why Buy From Apex Waves

Apex Waves Youtube Video

"The business transaction was super easy and friendly."


"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"


"They were very helpful to get me the test equipment that I need."


Delivery: UPS, FedEX and DHL – Free FedEx Ground on all orders
Overnight, Next Day Air or Expedited shipping options available
International delivery available
Same day shipping for in-stock on location
Warranty: All of our products are covered by our Apex Waves Warranty.
3 Year Warranty - New Surplus Parts
2 Year Warranty - Refurbished Parts
Returns: No hassle return policy.
Dedicated customer service team.
Payment: Authorize.Net paypal visa card master card american express card BB&T Bank better business bureau
Quick Quotes: Receive Price & Availability Today!
Calibration: Ask About Our Tiered Calibration Levels
Option & Modules: Confirm Your Requirements or Versions
Repair: Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Share this page: facebook twitter linkedIn