Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
VXI-SC-1102B
VXI-SC-1102B, 32 differential channels, Multiplexer Amplifier Module
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments VXI-SC-1102B Multiplexer Amplifier Module
The VXI-SC-1102B is a reliable Multiplexer Amplifier Module. The manufacturer of the VXI-SC-1102B multiplexer is National Instruments. The VXI-SC-1102B module is not a stand-alone module. The VXI-SC-1102B is known as a submodule of a large VXI-SC system. The other components or submodules of a VXI system are a carrier module and VXI-SC submodules. A VXI-SC system can have a single submodule or multiple SC submodules. The VXI-SC-1000 module is used as a carrier module in a VXI-SC system. The NI VXI-SC-1102B amplifier module is one of the SC submodules used in a VXI-SC system. As the name suggests, the VXI-SC-1000 carrier module carries the VXI-SC-1102B. There are sub-slots available in the VXI-SC-1000 in which the VXI-SC-1102B or any other submodule is installed.
This Multiplexer Amplifier Module is equipped with 32 analog input channels and one cold-junction sensor channel. Each channel of the VXI-SC-1102B has a 3-pole low-pass filter. This low-pass filter with a cutoff frequency of 200 Hz. Each channel of the National Instruments VXI-SC-1102B is equipped with an amplifier. The amplifier gain of the NI VXI-SC-1102B is selectable as 1 or 100.
The VXI-SC-1102B is capable of operating in multiplexer mode to generate a single output by multiplexing its inputs. This single output can drive a VXI-MIO board. The VXI-SC-1102B is used in multiplexer mode in those applications where the number of digitizable inputs is high. The NI VXI-SC-1102B is capable of signal conditioning different types of components, such as volt and millivolt sources having a low-bandwidth, thermocouples, and current sources.
VXI-SC-1102B Obsolete Status has been announced by National Instruments, but the module will still be available for purchase and repairs by Apex Waves.
| Model | VXI-SC-1102B |
|---|---|
| Manufacturer | National Instruments |
| Type | Multiplexer Amplifier Module |
| Channels | 32 differential |
| Maximum Working Voltage | Each input should remain within ±10 V of CGND |
| Input Damage Level | ±42 VAC peak or VDC |
| I/O Connector | 50-pin male ribbon cable rear connector and a 96-pin male DIN C front connector |
| Output Range | ±10 V |
| Dimensions | 4.54 by 10.75 in. |
| VXI-SC-1102B Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
Associated part numbers for VXI-SC-1102B:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
