Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Pickering 40-630-022-32/2, 32 Channels, 2-Pole, Multiplexer Module
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Pickering 40-630-022-32/2 Multiplexer Module
The Pickering 40-630-022-32/2 is a 32 channel 2 pole multiplexer designed for complex industrial automation systems to support precise signal routing tasks that require stable relay performance. It integrates ruthenium reed relays that provide reliable low level switching with controlled resistance stability. This multiplexer ensures consistent signal integrity across all active paths without introducing excessive thermal offset. It maintains predictable operating characteristics during continuous operation in controlled environments and offers dependable switching capability for industrial platforms.
The Pickering 40-630-022-32/2 module handles maximum switching voltages of 150 V DC or 100 V AC and supports 20 W of maximum power with 1 A peak switch current. Its design supports 1.20 A of peak carry current across active channels and its relays operate with typical on path resistance values below 750 m ohms. The unit’s architecture provides off path resistance above one G ohm under normal test conditions and it secures high isolation levels that reduce leakage during multiplexer operations. This module features bandwidth performance above 10 MHz using a single installed unit and its relays achieve typical operate times of 1 ms under standard conditions. It achieves faster switching performance of 500 microseconds when multichannel mode is enabled. The relay design supports long expected lifetimes of one billion operations at low power loads. This multiplexer maintains more than one million operations under maximum rated loads and its relay structure supports predictable signal behavior during repetitive actuation cycles.
The 40-630-022-32/2 unit operates from a 5 V source while draws 280 mA during typical service. Its hardware meets environmental requirements and supports operation up to 90% non-moist humidity levels. The module remains functional at altitudes up to 5000 meters during standard operation and its compact three U PXI form factor simplifies integration into compliant industrial chassis systems. The module connects through a 68-pin micro-D connector for signal routing tasks and its mechanical assembly includes spare reed relays that simplify maintenance during extended service cycles. Its PCB integrates automatic isolation switching that links only the selected bank to the common line. This multiplexer supports multiple channel selection modes without break before make restrictions. It complies with PXI specification 2.2 for controlled system interoperability and its design ensures consistent performance for automation platforms that require accurate and repeatable switching functions.
| Model | 40-630-022-32-2 |
|---|---|
| Manufacturer | Pickering |
| Part Type | Single 32-Channel Two-Pole Multiplexer |
| Max Switching Voltage | 150 VDC / 100 VAC |
| Max Power | 20 W |
| Off-Path Resistance | > 1×10â¹ Ω |
| Thermal Offset | < 10 µV |
| Bandwidth | > 10 MHz |
| Operate Time | 1 ms typical |
| PXI Bus | 32-bit P1/J1 backplane connector |
Associated part numbers for 40-630-022-32-2:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos: