Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Pickering 40-652A-003, 500 W, 2 Pole Paths, Solid State Multiplexer Module
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Pickering 40-652A-003 Solid State Multiplexer Module
The Pickering 40-652A-003 solid state multiplexer is an advanced PXI switching solution. The module supports multiple configurations that include single dual one pole and two pole paths. It operates within PXI Specification 2.2 limits. The design excludes local bus trigger bus and star trigger features for system clarity. The solid state multiplexer supports hot switch capacity of 5 A at 100 V. It manages surge current of 30 A for 300 µs under controlled switching conditions. The maximum switching power reaches 500 W which defines performance limits for loads. It supports maximum switching voltage of ±100 V which enables precise control of test signals. The continuous current rating of 5 A ensures stable operation during extended use within defined limits.
The 40-652A-003 multiplexer permits maximum pulse capacity of 30 A for 300 µs which covers short duration loads. The design handles switched inductive energy of 20 mJ under rated conditions without degradation. The path resistance is less than 0.18 Ohm and 0.14 Ohm under standard operation. The off path leakage remains under 1 µA at 25°C which supports accurate measurement tasks. The 40-652A-003 multiplexer module presents bandwidth near 1 MHz which supports stable performance in varied test setups. The isolation is less than 20 dB at 1 MHz which provides controlled separation between channels. The operate time of 85 µs supports rapid switching processes in complex automated systems. The rise and fall time remains under 10 µs which enables precise control of transition events. The expected life is indefinite when used within ratings which enhances reliability for long term use. The Pickering 40-652A-003 Multiplexer provides defined behavior under standardized PXI control operations. It excludes unused PXI buses which simplifies integration processes. The design supports structured switching tasks that require consistent performance under rated electrical conditions.
The 40-652A-003 multiplexer module features isolated MOSFET switching elements that maintain controlled operation across defined signal paths. The internal structure supports defined current flow that aligns with controlled switching strategies used in PXI systems. The Pickering 40-652A-003 integrates into environments that require stable switching patterns and defined operational predictability. It can tolerate high-levels of humidity up to 90% without even degrading working.
| Model | 40-652A-003 |
|---|---|
| Manufacturer | Pickering |
| Part Type | Solid State Multiplexer Module |
| Switching Technology | Isolated MOSFET |
| Hot Switch Capacity | 5 A at 100 V |
| Surge Current Rating | 30 A for 300 µs |
| Maximum Switching Power | 500 W |
| Maximum Continuous Current | 5 A |
| Maximum Switched Inductive Energy | 20 mJ |
| Bandwidth | 1 MHz typical |
Associated part numbers for 40-652A-003:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos: