Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
NHR-9430
NH Research NHR-9430, 4 Quadrant, Bi-Directional, AC/DC Load Device
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
National Instruments/NH Research NHR-9430 AC/DC Load System Series
The NHR-9430 from NH Research (an NI brand) is a 4-quadrant AC/DC load device used to evaluate, test, and measure AC/DC power products. Depending on power requirements, the hardware is available in different sizes, ranging from 4 kW to 96 kW. The smaller 4 kW to 12 kW units are 9U rack-mountable modules, while the larger models (from 24 kW up to 96 kW) are housed in large, pre-wired cabinets.
The NHR-9430 series offers single, split, or three-phase I/O. Because of its efficiency, the NHR-9430 may be used for testing electric vehicle (EV) systems, vehicle-to-grid (V2G) equipment, grid utilities, and grid-tied solar inverters.
The hardware includes terminal blocks for connecting to the electrical grid and the unit-under-test, cooling fans, hardware circuit breakers, emergency-off switches, and physical interlock connections. The 4 kW model weighs 145 lbs; the 8 kW model weighs 150 lbs, and the 12 kW model weighs 1,560 lbs for the 96 kW double-cabinet model.
National Instruments provides PC-based software, NI NHR-9400 Panel, that allows users to connect to the NHR-9430 hardware over a LAN network and remotely control the device, execute test macros, log SCPI communication, and view simulated oscilloscope outputs. The NHR-9430 has an integrated waveform digitizer that provides power analysis and eliminates the need for integrating extra measurement equipment.
For automated testing, the hardware can be controlled using external programming environments. It is compatible with NI's LabVIEW and supports SCPI commands via LAN or VXI-11 protocols. For modules 12 kW and smaller, users must jumper pins 1 and 2 of the emergency stop connector with a wire or wire it to a physical emergency stop switch. Systems larger than 12 kW come with an emergency stop switch already mounted and pre-wired on the cabinet. The operating temperature range for the NI NHR-9430 is 0°C to 35°C.
| Model | NHR-9430 |
|---|---|
| Manufacturer | National Instruments/NH Research |
| AC Voltage | 35 to 350 Vrms |
| Part Type | Electronic Testing Device (AC/DC loads) |
| Power Ratings | Ranges from 4 kW to 96 kW (depending on the model) |
| Channels/Phases | Single-, Split-, or 3-Phase operation |
| Frequency | 30 to 880 Hz |
| DC Voltage | 10 - 200 or 400 VDC |
Associated part numbers for NHR-9430:
NHR-9430 PDF Manuals
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
