Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
41-750-001
Pickering 41-750-001, 25-Pin D-Type Connector, 1 Slot, PXI Battery Simulator Module
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Pickering 41-750-001 PXI Battery Simulator Module
The Pickering 41-750-001 is a single slot PXI battery simulator designed to simulate low voltage battery sources with high accuracy and stable output. The unit provides isolated output capability and offers up to 6 V output and supports remote voltage sense to maintain accurate load side regulation. The unit operates from the PXI backplane power supply and requires no external power source. It uses a precision monitor that measures output voltage with a DMM accuracy of ±30 µV. The 41-750-001 battery simulator has a current monitor accuracy of 1% ±1 mA after zero correction. The module uses isolated outputs that prevent unwanted ground paths during system level integration.
The isolation supports reliable test conditions for battery powered circuits that must operate independently. Each output channel maintains stable operation across a 0 °C to +55 °C operating temperature range for reliable measurements. The battery simulation unit has full short circuit protection and thermal protection to safeguard connected devices. The protection system reports activation events to the host controller for maintaining controlled test environments. Prolonged protection operation is discouraged because extended overload conditions may generate thermal stress.
The 41-750-001 module uses a 25-pin male D-type connector that supports each electrical connection with two physical pins. This design permits doubling of connections to increase mechanical reliability during repeated connection cycles. The connector arrangement supports structured wiring that maintains consistent output performance. The Pickering 41-750-001 occupies a 3U one slot mechanical format that fits standard chassis configurations. The interface supports VISA and Kernel Drivers for Windows XP Vista 7 and 8 systems to ensure direct software integration. A soft front panel is included to provide manual control during development tasks. The humidity tolerance reaches 90% non-condensing which supports operation in controlled environments. The altitude rating reaches 5000 m which accommodates operation in varied installation conditions. The internal monitor system permits reliable verification of output status without external instrumentation. The programmable voltage output uses a 16-bit DAC system that ensures fine resolution for low voltage simulation. Digital control functions include a 96-bit output resource used for current sink configuration.
| Model | 41-750-001 |
|---|---|
| Manufacturer | Pickering |
| Part Type | PXI Battery Simulator Module |
| Output Voltage Range | Up to 6 V |
| Current Sink Capability | Programmable to 0.5 A |
| Voltage Monitor Accuracy | DMM ±30 µV |
| Current Monitor Accuracy | 1% ±1 mA (after zero correction) |
| Output Isolation | Fully isolated outputs |
| Output Connector | 25-pin male D-type with dual-pin support |
| Backplane Interface | 33 MHz, 32-bit PXI |
Associated part numbers for 41-750-001:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
