Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
DPP15-24
TDK Lambda DPP15-24, 15 W Max Output, 630 mA Max Output Current, DIN Rail Mount Power Supply
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
TDK Lambda DPP15-24 DIN Rail Mount Power Supply
The TDK Lambda DPP15-24 is a DIN rail mount power supply built for industrial automation applications. This unit accepts single phase input voltage from 85 to 264 Vac. The model has a maximum current of 630 mA and a rated output of 24 Vdc. Under rated load, the power supply's total output power reaches 15 W. A green LED indicator on the front panel of the model confirms active output status. This power supply does not support parallel switch operation between multiple connected units. The output voltage accuracy stays within ± 1 % with units preset at 24.5 V. The output voltage range extends from 22.5 to 28.5 Vdc allowing flexible load matching across applications. The line regulation and load regulation both remain below 0.5 % on this model. The ripple and noise output stays under 50 mV measured across a 20 MHz bandwidth. The physical dimensions for the power supply measure 23 by 75 by 97 millimeters overall. The total weight for this DIN rail power supply stays near 130 grams typical.
The efficiency for the DIN Rail Mount Power Supply reaches 80 % typical under standard operating loads. The overcurrent protection on this unit activates once output exceeds 120 % of rated current. The overvoltage protection on the model triggers within a range of 125 V to 137.5 V. The hold up time exceeds 20 ms when tested with 115 VAC input. The model operates across an ambient temperature range of – 10 °C to + 71 °C. The output current derates linearly by 5 % per degree Celsius between 61 °C and 71 °C. The storage temperature for the DPP15-24 Power Supply spans – 25 °C to + 85 °C without affecting performance. The operating humidity tolerance for this unit ranges from 20 % to 90 % RH non condensing. The convection cooling on the model removes the need for fans or forced airflow. The input to output withstand voltage rating reaches 3 kVAC for one minute. The isolation resistance on the model exceeds 100 MΩ when measured at 25 °C and 70 % RH.
| Model | DPP15-24 |
|---|---|
| Manufacturer | TDK Lambda |
| Part Type | DIN Rail Mount Power Supply |
| Maximum Output Power | 15 W |
| Input Voltage Range[AC] | 85 to 264Vac |
| Rated Output Voltage[DC] | 24Vdc |
| Maximum Output Current | 630 mA |
| Efficiency | 80% Typ. |
| Output Voltage Range[DC] | 22.5 to 28.5Vdc |
| Input | Single-phase |
Associated part numbers for DPP15-24:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
