Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
DSP10-24
TDK Lambda DSP10-24, 10.1 W Max Output Power, 3 kV Isolation Voltage, AC/DC DIN Rail Power Supply
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
TDK Lambda DSP10-24 AC/DC DIN Rail Power Supply
The DSP10-24 AC/DC DIN Rail Power Supply is a switch mode unit. It delivers a regulated 24 V DC output through a single fixed channel. The power supply provides 420 mA output current for continuous industrial operation. The rated output power reaches 10.1 W under specified electrical conditions reliably during extended service intervals. It works on a wide input ranges that spans from 90 V AC to 264 V AC across global distribution networks.
The nominal operating input is in the range 100 V AC to 240 V AC. The frequency support is 47 Hz to 63 Hz ensuring stable conversion performance. The use of switch mode topology provides efficient energy conversion processes. The efficiency under rated loading and environmental parameters is 80%. The controlled design reduces the thermal stress during long operating cycles. The power supply is delivered with a single output architecture, for easy integration into compact control cabinet assemblies. The output voltage range expands to a maximum of 28 V under specified configuration limits. When operating, the output ripple and noise are 50 mV peak to peak. Consistent downstream device functionality and accuracy are supported by tight electrical regulation. Line regulation is defined as 1% over input variations. The load regulation is 1% with stable output characteristics. Electrical isolation voltage is 3 kV between input/output sections.
The inrush current of the unit is 30 A at start up condition. The unit can be energized in a controlled way with controlled behavior. Reliable conductor retention during installation procedures with screw terminal connections. The termination design facilitates easy wiring operations in industrial enclosures. The range of operating temperature of the DSP10-24 further extends from a minimum of -25 °C to 71 °C for deployment flexibility and appropriate functioning. It features thermal specifications that contribute to ensuring reliable performance in demanding industrial environments. The fixed output configuration simplifies the automation equipment to be supplied. The regulated output is designed for controller sensors and interface modules. The DIN Rail Power Supply has stable current availability which helps to ensure reliable device operation under rated conditions.
| Part Number | DSP10-24 |
|---|---|
| Manufacturer | TDK Lambda |
| Part Type | AC/DC DIN Rail Power Supply |
| Rated Output Voltage | 24 V DC |
| Power Supply Technology | Switch Mode |
| Rated AC Input Voltage | 90 V AC to 264 V AC |
| Maximum Output Current | 420 mA (0.42 A) |
| Isolation Voltage | 3 kV |
| Maximum Output Power | 10.1W |
| Typical Efficiency | 80% |
Associated part numbers for DSP10-24:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
