Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
GEN100-15
TDK Lambda GEN100-15, Constant Current, Constant Voltage, Programmable DC Power Supply
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
TDK Lambda GEN100-15 Programmable DC Power Supply
The TDK Lambda GEN100-15 is a programmable DC power supply built for precision critical industrial automation applications. It provides a rated output of 100 V at 15 A, delivering a continuous power output capacity of 1500 W. The operating efficiency on the model reaches up to 88% at a 200 Vac input voltage rating. The unit supports both constant voltage mode and constant current mode to suit diverse load characteristics.
The readback current resolution on the GEN100-15 DC power supply is 0.15 mA with an accuracy of 22.50 mA. The readback voltage resolution is 11.0 mV, and the corresponding accuracy is 50 mV at 0.05% of V rated. The OVP and UVL protection programming on the power supply provides a resolution of 100 mV at 0.1% of Vo. The accuracy for OVP and UVL programming is 1000 mV, which equals 1% of rated output voltage.
The GEN100-15 achieves a maximum line regulation of 12 mV within standard rated output conditions in constant voltage mode. The load regulation performance is equally specified at 12 mV, ensuring output precision under dynamic load variations. The peak-to-peak ripple and noise at 20 MHz is rated at a low 75 mV, which is an improved specification. The RMS output ripple from 5 Hz to 1 MHz is 8 mV, representing a notably improved performance value.
The up programming response time on the GEN100-15 power supply is 80 ms under both no-load and full-load resistive conditions. The down programming response time is 150 ms at full load and extends to 1500 ms in no-load conditions. The temperature drift is 0.01% of rated Vout over an 8-hour interval following 30 minutes of warm-up.
The remote sense compensation on the GEN100-15 Programmable DC Power Supply supports up to 4 V per line to offset cable voltage losses. The temperature coefficient in CV mode is 50 PPM per degree Celsius of rated output voltage after warm-up. The temperature stability is maintained at 0.01% of rated output over 8 hours at constant line and load.
Part Number |
GEN100-15 |
|---|---|
Manufacturer |
TDK Lambda |
Part Type |
Programmable DC Power Supply |
Output Voltage DC |
0 To 100 Vdc |
Rated Output Current |
15 A |
Output Current |
0 To 15 A |
Rated Output Power |
1500 W |
Efficiency |
88% Typical |
Voltage Ripple Noise |
0.008 Vrms, 5 Hz-1 MHz |
Current Ripple Noise |
0.045 Arms, 5 Hz-1 MHz |
Associated part numbers for GEN100-15:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
