Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
B200LFR-2F-5B
Pickering B200LFR-2F-5B, 200-Pin, 150 V, LFH Female Connector Block
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Pickering B200LFR-2F-5B LFH Female Connector Block
The Pickering B200LFR-2F-5B LFH connector block is a high-density interface assembly designed for PXI modules. It uses a specialized interconnect solution that supports precision signal routing. This connector block uses a 200-pin LFH female interface that enables reliable contact alignment. The connector block features an integrated metal back-shell that protects internal wiring. The housing construction provides mechanical rigidity under continuous operational loads. The back-shell includes a secure cable clamp that maintains effective strain relief. The B200LFR-2F-5B female connector block includes rising cage screw terminals that support firm wire retention. Each terminal uses an M4 thread that delivers consistent tightening engagement. The terminal pitch of 5.08 mm offers efficient spacing for organized field wiring. The terminal design ensures controlled clamping pressure across all associated conductor sizes.
The B200LFR-2F-5B supports a current rating of 1 A for continuous operation. The voltage rating of 150 V DC allows controlled handling of various low-voltage test signals. The electrical design ensures stable distribution of loads under defined switching applications. The front interface uses a fine-pitch geometry and supports secure seating using 4-40 UNC screw-locks for defined retention to prevent interface displacement during extended operational cycles. It supports direct front-panel mounting on PXI switching and simulation modules. The B200LFR-2F-5B connector block can bear a moisture level up to 90% at non-condensing.
The B200LFR-2F-5B block screw assembly is well-suited with PTFE-insulated cable for optimal dielectric performance. PTFE insulation offers reliable thermal characteristics for stable conductivity properties. The recommended cable material ensures long-term insulation quality under varied environmental loads. This compatibility enhances overall wiring reliability in controlled instrumentation setups. The connector block is CE marked for conformity with applicable regulatory standards. The Pickering Connector Block is UL recognized which supports its integration within certified system assemblies. It can be easily installed at an altitude of 5000 m above sea level without degrading operating performance. The metal housing highlights a uniform machined structure. The front opening reveals the dense LFH grid that identifies the pin arrangement. The exterior finish indicates a corrosion-resistant surface prepared for technical environments. The operating temperature range for the unit spans from 0°C to +55°C and supports stable functioning within this defined interval.
| Model | B200LFR-2F-5B |
|---|---|
| Manufacturer | Pickering |
| Part Type | 200-pin LFH Female Connector Block |
| Connector Type | 200-pin LFH female |
| Terminal Type | Rising cage screw terminals |
| Terminal Thread Size | M4 |
| Terminal Pitch | 5.08 mm |
| Current Rating | 1 A |
| Voltage Rating | 150 VDC |
| Operating Temperature | 0°C to +55°C |
Associated part numbers for B200LFR-2F-5B:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
