E1340A

Request for Availability

Keysight/Agilent E1340A, 1 Slot, 12 Bit, Register-Based, VXI, Arbitrary Function Generator, B-Size

Rated 4.7/5  |  7 ratings

❮ ❯

Actual item may vary if no part number is provided on quote request.

E1340A Keysight VXI Function Generator | Request a Quote | Image
E1340A Keysight VXI Function Generator | Request a Quote | Image
E1340A New
E1340A Refurbished

✔ 2 Year Warranty Included

✔ Free Domestic Ground Shipping

✔ NIST Calibration Available

Request a Quote

Get Price & Availability for the E1340A

Fast response from an Apex Waves specialist.

Fast Response Avg. 15 min
ISO 9001 Quality 2 Year Warranty
Check Availability Get Current Lead Time

Keysight/Agilent E1340A Arbitrary Function Generator, B-Size

The E1340A Arbitrary Function Generator from Keysight provides register-based waveform generation within compact single-slot B-size platforms. It allows integration through VXI communication architecture interfaces for testing. The unit transfers data through dependable A16 D16 slave communication bus implementations successfully daily. The single-slot configuration preserves chassis capacity while maintaining comprehensive random signal generation capabilities.
The unit provides 12-bit amplitude resolution for accurate waveform reproduction. The integrated wave engine performs reliable 42 MSa/s sampling in continuous operation in test environments. The internal waveform memory contains 16 kSa capacity supporting segmented storage configurations for application flexibility during development requirements. 4 active waves in memory for efficient transitions between programmed output conditions during sequencing. 

The E1340A arbitrary function generator has onboard sine generation and features sine, square, ramp, triangle, and sinc noise. The sine waveform output frequency achieves 15 MHz and is suitable for electronic development laboratories throughout the world for frequency characterization procedures. 

The pulse and square waveform transitions deliver a typical rise time of 25 nanoseconds for fast response time on the edges. The unit provides 24-nanosecond jitter characteristics, ensuring stable timing behavior in precision measurement sequences and reliable applications. The frequency sweep function is available for a sweep interval of 0.01 Hz up to 15 MHz, with linear operation methods for characterization procedures. Gradual changes from 0.4 Hz increments to 2.6 MHz progression are achieved well during frequency analysis using sweep rate adjustment. 

The E1340A Arbitrary Function Generator's FSK modulation feature allows frequency shift operation rates of up to 3 kHz in controlled communication simulation environment applications. Accurate synchronization across an extended measurement operating range is provided by operating the internal time base at 42.9 MHz. The connector implementation utilizes P1 interfaces supporting reliable electrical combinations. Output resolution remains consistent at 12 bits, supporting accurate analog waveform representation during critical testing procedures universally.

The maximum output amplitude reaches 10.2 volts peak to peak across standard 50-ohm operational loading conditions. The amplifier configuration enables expanded 20-volt peak-to-peak waveform output performance capabilities externally. The offset adjustment ranges extend between positive and negative 5.11 volts. 

The E1340A gives burst waveform looping between single cycles and continuous operation modes. This supports programmable repetitions reaching 65534 cycles during automated waveform generation procedures without interruption events.

E1340A Technical Specifications
ModelE1340A
ManufacturerKeysight/Agilent
Part TypeArbitrary Function Generator, B-size
Sample Rate42 MSa/s
Time base42.9 MHz (50 ppm) or external
Data Transfer BusA16, D16 DTB Slave
Amplitude Resolution12 bits
VXI Device TypeRegister Based
Maximum Waveform Frequency15 MHz (sine) · 1 MHz (square, ramp/triangle)
Offset Range± 5.11 V into 50 Ohms

Associated part numbers for E1340A:

Delivery:

Free FedEx or UPS Ground shipping is offered on domestic orders. Expedited and international options are available; shipping other than domestic ground is customer-paid.

View shipping and delivery policy

All of our products are covered by our Apex Waves Warranty.

✓ 3 Year Warranty - New Surplus Parts

✓ 2 Year Warranty - Refurb / Fully Tested Parts

Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.

View returns policy or submit a return request.

Payment:

Authorize.net Visa Master Card American Express Truist icon logo Better Business Bureau Dun & Bradstreet

Receive Price & Availability Today!

Ask About Our Tiered Calibration Levels

Option & Modules:

Confirm Your Requirements or Versions

Cost & Lead Time Available Upon Request for Service

Repair Evaluation: $150

Share this page:

Common Typos:

W1340A, R1340A, E1E40A, E1R40A, E1340X

Why Buy From Apex Waves:

Video thumbnail for Apex Waves Unboxing Experience Video