782097-01 Request for Availability

National Instruments 782097-01 Digitizer Adapter Module for FlexRIO

Part Number 782097-01 is the identifying part number for the National Instruments NI-5771 Digitizer Adapter Module for FlexRIO. The 782097-01 features two single-ended analog input channels that are simultaneously sampled. The connector type used for analog inputs is SMA and the input impedance is 50 Ω, per connector. The input channels are AC-coupled and the ADC can be identified as ADC12D800RF. The digital data resolution is 12 bits for unsigned binary data while the absolute maximum voltage without damage is ±10 VDC, +21 dBm (7.1 Vpk-pk). 

The internal sample clock on the 782097-01 uses a VCO as the oscillator and has a frequency of 800 MHz ± 25 ppm. The CLK IN has a single-ended channel and uses a SMA connector with an input impedance of 50 Ω. The frequency range is 400 MHz to 800 MHz and the input line is AC-coupled. The input voltage range is +2 dBm (800 mVpk-pk) to +16 dBm (4 Vpk-pk) while the absolute maximum voltage without damage is ±30 VDC, +21 dBm (7.1 Vpk-pk). The duty cycle for CLK IN is 30% to 70%. 

The AUX I/O on the 782097-01 has 12 bidirectional channels (8 DIO and 4 PFI) and uses a HDMI connector. The interface standard is 3.3 V LVCMOS and the recommended operating voltage is -0.3 V to 3.6 V. Likewise, the maximum toggle frequency is 100 MHz while the overvoltage protection is ±10 V.

The 782097-01 measures (5.1 × 0.8 × 4.7 in.) in physical dimensions and weighs 660 g. There are 5 SMA and one HDMI connector in the front panel. The total power consumed by the module is 5.1 W. The module is recommended for operation between temperatures of  0 °C to 55 °C at a relative humidity of 10% to 90%. Likewise, it is designed for indoor use only and should be operated within a maximum altitude of 2000 m. On the other hand, it can be stored between  -40 °C to 70 °C at a relative humidity of 5% to 95%.