781397-01 Request for Availability

National Instruments 781397-01 Voltage Input Module 

National Instruments part number 781397-01 is an identifying part number for the NI-9222, a Voltage Input Module. This Voltage Input Module is a fast, synchronous module for use in any NI CompactDAQ or CompactRIO chassis. With a sampling rate of up to 500 kS/s per channel and simultaneous analog-to-digital converters (ADCs), this module is suitable for various applications, including ballistics, impact, and blast wave testing. It is used for estimation, control, and communication applications. 

The C Series modules can connect to any sensor or bus and enable high-accuracy measurements for advanced data acquisition and control applications. The NI 781397-01 Voltage Input module is compatible with many platforms and can be moved between platforms without adjustments. This module supports a low-power sleep mode. The sleep mode support depends on the system the module is connected to. In sleep mode, the system consumes minimal power and dissipates less heat than in normal mode. 

This Device runs using the NI-DAQmx driver software, which is compatible with software packages and application development environments (ADEs) like LabVIEW, LabWindows/CVI, C/C++, C#, and Visual Basic .NET. You can configure the device hardware using the Measurement & Automation Explorer (MAX) tool. The NI 781397-01 offers signal conditioning for estimation signals connected to a network of sensors and signals. It provides isolation options such as bank-to-bank, channel-to-channel, and channel-to-ground. The module has an operating temperature range of -40 °C to 70 °C to suit various applications and environmental needs and is hot-swappable.