777243-01

Request for Availability

NI 777243-01, 6U single slot, VMEbus Extender

Rated 4.8/5  |  7 ratings

❮ ❯

Actual item may vary if no part number is provided on quote request.

National Instruments - MXI-2 Series - 777243-01
National Instruments - MXI-2 Series - 777243-01 - Wiring
777243-01 New
777243-01 Refurbished

✔ 2 Year Warranty Included

✔ Free Domestic Ground Shipping

✔ NIST Calibration Available

Request a Quote

Get Price & Availability for the 777243-01

Fast response from an Apex Waves specialist.

Fast Response Avg. 15 min
ISO 9001 Quality 2 Year Warranty
Check Availability Get Current Lead Time

National Instruments 777243-01 VMEbus Extender

The NI 777243-01 is a 6U single slot VMEbus extender which extends the VMEbus architecture by use of MXI-2 technology; this allows the extension of VMEbus operations outside of the physical confines of the VMEbus chassis. The NI 777243-01 connects to the MXI bus through a cable connection and allows remote computers to directly control the VMEbus backplane. Shared memory communications, fast data transfer rates, and direct VMEbus control are possible when utilising an external computer while maintaining the low cost and high degree of flexibility provided by having an external computer. The NI 777243-01 can be mounted in either the leftmost slot as the VMEbus system controller or in any other slot position within a VME chassis. The register set implemented on the NI 777243-01 follows the VXIbus specifications, operates in A16 space with D16 capability, and all registers are accessible from both the VMEbus and the MXIbus.

The NI 777243-01 utilises custom ASICs to implement four address mapping windows (A32, A24, A16 & VXI configuration), providing a uniform address mapping scheme throughout the entire system. Each window can independently distribute VMEbus address spaces over multiple main frames; therefore, each device in the system has access to a single unified address map. The NI 777243-01 supports master & slave modes for A32, A24, A16, D64 (VME64), D32, D16, & D8 widths and translates MXIbus block mode transfers into VMEbus block mode transfers. In cases where a VME slave does not support block mode operation, the NI 777243-01 will automatically generate non-block mode VMEbus cycles while maintaining block mode operations on the MXI bus side.

The NI 777243-01 buses all seven VXIbus interrupt lines across the MXI-2 cable; therefore, external computers and embedded controllers can detect, assert and service interrupts across multiple mainframes without additional software. Optionally installed onboard DRAM provides additional shared memory on the VMEbus, reducing dependence upon standalone memory cards. Up to eight devices per MXI link are supported, and multiple VME-MXI-2 boards can be installed within one chassis to add additional MXI links.

777243-01 Technical Specifications
Model777243-01
Part Number777243-01
Model NameVME-MXI-2
ManufacturerNational Instruments
BrandEmerson
Part TypeVMEbus-to-MXIbus Extender Board
Form Factor6U, Single-Slot VMEbus Module
Bus ArchitectureMXI-2
Address Space SupportA32, A24, A16 + VXI Config Space
Data Transfer WidthsD64, D32, D16, D8
Address Mapping Windows4 Independent Windows
Interrupt Lines7 VXIbus Lines via MXI-2 Cable
MXI Link Device CapacityUp to 8 Devices per Link

Associated part numbers for 777243-01:

Delivery:

Free FedEx or UPS Ground shipping is offered on domestic orders. Expedited and international options are available; shipping other than domestic ground is customer-paid.

View shipping and delivery policy

All of our products are covered by our Apex Waves Warranty.

✓ 3 Year Warranty - New Surplus Parts

✓ 2 Year Warranty - Refurb / Fully Tested Parts

Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.

View returns policy or submit a return request.

Payment:

Authorize.net Visa Master Card American Express Truist icon logo Better Business Bureau Dun & Bradstreet

Receive Price & Availability Today!

Ask About Our Tiered Calibration Levels

Option & Modules:

Confirm Your Requirements or Versions

Cost & Lead Time Available Upon Request for Service

Repair Evaluation: $150

Share this page:

Common Typos:

7Y7243-01, 7U7243-01, 77Y243-01, 7772R3-01, 7772T3-01

Why Buy From Apex Waves:

Video thumbnail for Apex Waves Unboxing Experience Video