Anonymous Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
40-263-403
Pickering 40-263-403, 8-Channel, 100 mW Max Power, RTD Simulator Module
Actual item may vary if no part number is provided on quote request.
✔ 2 Year Warranty Included
✔ Free Domestic Ground Shipping
✔ NIST Calibration Available
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Carol Zimme**** Verified Buyer
" Very responsive and helpful, competitive pricing. Good source! "
July 2025
Andrew Gar**** Verified Buyer
" Amazing to work with and had my order within 1 week after purchasing with all NI certs and data that were needed. "
March 2025
Said Sai**** Verified Buyer
" Competent contact for highly specialized components. The support team is very knowledgeable. Many thanks for the help and the fast shipping! "
January 2025
Bob C**** Verified Buyer
" Jason was able to get our emergency situation taken care of quickly and professionally. "
May 2025
Gregg Flecki**** Verified Buyer
" Great service and great products. This is my 2nd time using Apex Waves, truly impressed. "
January 2025
Pickering 40-263-403 RTD Simulator Module
The Pickering 40-263-403 RTD Simulator Module is an industrial automation component supporting PT1000 sensors. It provides 8 simulation channels designed for precision temperature dependent resistance applications. Each channel delivers controlled resistance values that accurately represent PT1000 sensor characteristics across wide ranges. The 40-263-403 module operates over a resistance range from 400 ohms to 9000 ohms for PT1000 simulation. It achieves continuous resolution below 0.100 ohms to support refined calibration procedures efficiently. Its simulated temperature coverage spans -150 degrees to above 850 degrees. The temperature resolution remains under 0.03 degrees.
The simulation module 40-263-403 employs selectable common mode voltages of 0, +12 or -12 V. Its external common mode input up to 50 V is supported when isolated system design is required. Each of its channel withstands differential voltages between -13.5 V and +13.5 V. The unit’s maximum channel power is 100 mW which must be considered for reliable deployment strategies. The module uses stable reed relay technology that ensures predictable switching characteristics under continuous operational loads. Its typical operating time of 3 ms enables responsive transitions between programmed resistance values. This module maintains thermoelectric electromotive force below 3 micro-V to reduce unwanted measurement offsets. Its resistance is by default to open circuit during power loss for protecting attached instrumentation from adverse conditions.
The Pickering 40-263-403 RTD simulator module integrates a front panel 26 pin connector that supports 8 simulation channels. A dedicated 9 pin calibration connector enables 4 terminal measurements for accurate resistance verification tasks. The module can be cascaded to allow 1 digital multimeter for validating several units without disconnecting equipment. Its calibration procedures can be executed while test hardware remains connected which reduces maintenance time significantly. This 40-263-403 module conforms to PXI specification two point two and uses a 33 MHz interface. It occupies one PXI slot which supports efficient integration into dense simulation architectures. Safety compliance includes low voltage and electromagnetic standards that confirm suitability for regulated environments. The 40-263-403 unit maintains reliability through consistent construction that supports long term operational frameworks. It provides controlled simulation for industrial systems requiring deterministic temperature-based resistance behavior modelling. The module offers stable performance characteristics required for automation projects requiring dependable RTD emulation capabilities. It supports repeatable resistance settings which enable accurate modeling of dynamic sensor behaviors and its architecture provides deterministic switching sequences that preserve consistency.
| Model | 40-263-403 |
|---|---|
| Manufacturer | Pickering |
| Part Type | RTD Simulator Module |
| Channels | 8 |
| Simulated Sensor Type | PT1000 |
| Resistance Range | 400 Ω to 9000 Ω |
| Resistance Resolution | <100 mΩ |
| Thermoelectric EMF | <3 µV |
| Operating Time | 3 ms typical |
| Maximum Power per Channel | 100 mW |
Associated part numbers for 40-263-403:
Delivery:
Eligible returns may be accepted within 30 days at Apex Waves’ discretion. A 25% restocking fee applies; non-refundable and built-to-order products are excluded.
Payment:
Receive Price & Availability Today!
Ask About Our Tiered Calibration Levels
Option & Modules:
Confirm Your Requirements or Versions
Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Common Typos:
Why Buy From Apex Waves:
