Keysight Agilent HP N51xx Signal Generators

Keysight Agilent HP 81100 Series of Pulse Pattern Generators

The Keysight 835xx Series contains 17 models; the 8350B Sweep Oscillator is the Mainframe and the other models are RF Plug-in or Millimeter-Wave Source modules for the mainframe. The 8350B Sweep Oscillator has several different sweep modes: CW Frequency, START-STOP, Marker Sweep, CENTER Frequency, and Marker-> Center frequency. There are five settable frequency markers, and a sweep time ranging from 0.01-100 seconds. The frequency range and other specifications are determined by the plug-in module being used. The 8350B can be controlled remotely with the Hewlett-Packard Interface Bus (HP-IB). Every front panel function is programmable through the HP-IB, minus the line switch. The applications the 835xx Series are best for include: scalar network analysis, serving as a local oscillator for down-converting high frequency signals, and some of the RF plug-ins can be used as a stand-alone RF signal source. Additionally, the Millimeter-Wave Source Modules can be used as a mixer LO in certain applications and prolong the accessible dynamic range in frequency response measurements. The Millimeter-Wave Source Modules provide leveled high output power, complete waveguide band frequency coverage, as well as high frequency preciseness and resolution of the driving microwave foundation.

The Keysight 836xx Synthesized Swept Signal and CW Generator Series can be used in the following applications: upconverter, local oscillator (LO) for frequency conversion of signals for noise figure measurements, receiver tests, and frequency time-interval assessment, 8510 compatibility, antenna scan simulation, radar target return simulation, general-purpose synthesized microwave source capability, mixer test LO, and various others. This series has features such as great swept power preciseness, analog power sweep, 5 ms switching time with narrow steps, user flatness power correction, list, ramp, and step sweep modes. The B models have additional features, including linear AM, an internal modulation generator, 8 MHz FM bandwidth, and more. Software development time can be greatly decreased on the 836xx Synthesized Swept Signal and CW Generators by employing languages such as SCPI and CIIL. These languages guarantee compatibility with Agilent scalar and vector network analyzers. These models are an economical, affordable solution with the valuable option to upgrade later. Another useful feature of the 836xx series is these Synthesized Swept Signal and CW Generators are only required to be calibrated every two years. If issues occur, there are more than 280 internal self-tests to swiftly pinpoint over 95% of the fiascos to the assembly level.

E44xx ESG Signal Generators | Keysight Technologies | Signal Generators | In Stock & Ready to Ship | Apex Waves

E82xx PSG Signal Generators | Keysight Technologies | Signal Generators | In Stock & Ready to Ship | Apex Waves

High Performance Arbitrary Waveform Generators | Keysight Technologies | Signal Generators | In Stock & Ready to Ship | Apex Waves

MXG RF Analog Signal Generator

N51xx Signal Generators | Keysight Technologies | Signal Generators | In Stock & Ready to Ship | Apex Waves