Accessories
The National Instruments accessories comprise a wide variety of terminal blocks, connector blocks, expanders, rack-mount kits, and other types of accessories that can be used with NI instruments. NI accessories can be purchased with other NI products to configure systems for different requirements.Accessories
The National Instruments accessories comprise a wide variety of terminal blocks, connector blocks, expanders, rack-mount kits, and other types of accessories that can be used with NI instruments. NI accessories can be purchased with other NI products to configure systems for different requirements.Call now for best pricing
800 915 6216
800 915 6216
| Accessories | Description | Stock Level |
| 182444-01 | R50M-50F 3 Inch Ribbon Cable for Use With SH6850 Cable | Call |
| 194096-01 | National Instruments 194096-01- for use with Digital Flying-Leads Cable | Call |
| AMUX-64T | National Instruments AMUX-64T- compatible with E Series DAQ devices | In Stock Ships Today |
| APS-4100 | National Instruments APS-4100 Auxiliary Power Supply | In Stock Ships Today |
| ATCA-3671 | National Instruments ATCA-3671- 64 DMA channels | Call |
| BNC-2090A | NI BNC-2090A- for E/M Series DAQ Devices | In Stock Ships Today |
| CA-1000 | National Instruments CA-1000- for use with NI DAQ devices | In Stock Ships Today |
| CAL-4300B | CAL-4300B Calibration Accessory with 1:30 Attenuation Ratio, | Call |
| CAL-4330 | CAL-4330 Calibration Fixture for Use With the PXIe-4330 and the PXIe-4331 | Call |
| CAL-9219 | CAL-9219 Calibration Fixture for the NI-9219 with Built-In Voltage and Current Excitation | Call |
| CB-100 | NI CB-100- designed for most 100-pin, NI DAQ boards | In Stock Ships in 5-10 Days |
| CB-2162 | National Instruments CB-2162- 6 control I/O channels | In Stock Ships Today |
| CB-2180 | National Instruments CB-2180- compatible with SHS68-C68-S cable | Call |
| CB-27 | National Instruments CB-27 Connector Block- 30-position right angle connector | Call |
| CB-68LP | National Instruments CB-68LP- 68-pin connector | In Stock Ships Today |
| CB-68LPR | National Instruments CB-68LPR Desktop Mount Connector Block | In Stock Ships Today |
| CC05120X | NI CC05120X- 5 Arms measure current | Call |
| CC0550X | NI CC0550X- current oscilloscope probe | Call |
| CC15010X | NI CC15010X- 150 A current | Call |
| CC30100X | NI CC30100X- 30 Arms measure current | Call |
| CC3050X | NI CC3050X- current oscilloscope probe | Call |
| CC5002X | NI CC5002X- 500 A measure current | Call |
| CDA-2990 | National Instruments CDA-2990- with GPSDO option available | Call |
| cFP-PM-H | cFP-PM-H Horizontal Panel Mounting Kit for 4 Slot and 8 Slot Backplanes | Call |
| cFP-RM-8 | National Instruments cFP-RM-8 Rack Mounting Kit | Call |
| CP400X | NI CP400X- 10 X attenuation | Call |
| CP500X | NI CP500X- -60 V to 60 V voltage range | Call |
| CPS-8910 | National Instruments CPS-8910- compatible with copper and fiber optic cables | Call |
| cRIO-9912 | cRIO-9912 DIN Rail Mount Kit for cRIO and cDAQ | In Stock Ships Today |
| cRIO-9915 | cRIO-9915 DIN Rail Mount Kit 8-Slot cRIO and cDAQ Modules | Call |
| cRIO-9932 | National Instruments cRIO-9932- for use with 10-position, spring terminal C Series modules | In Stock Ships Today |
| cRIO-9933 | cRIO-9933 37 Pin DSUB Connector Kit | Call |
| cRIO-9934 | cRIO-9934 25 Pin D-SUB Connector | Call |
| cRIO-9936 | National Instruments cRIO-9936- contains 10 screw terminal plugs | Call |
| cRIO-9938 | National Instruments cRIO-9938 High-Voltage Backshell | Call |
| cRIO-9940 | National Instruments cRIO-9940- compatible with the cRIO-9974 | In Stock Ships Today |
| cRIO-9952 | National Instruments cRIO-9952- PCB right‑angle 15‑position D‑SUB connectors | Call |
| cRIO-9953 | National Instruments cRIO-9953- custom connectivity options | Call |
| cRIO-9954 | National Instruments cRIO-9954- 8 LED slots | Call |
| cRIO-9955 | National Instruments cRIO-9955- no LED slots | Call |
| cRIO-9956 | National Instruments cRIO-9956- PCB right-angle D-SUB connector | Call |
| cRIO-9957 | National Instruments cRIO-9957- requires NI-9958 for a complete enclosure | Call |
| CSM-10A | National Instruments CSM-10A- 400 mV burden voltage | Call |
| CSM-200mA | National Instruments CSM-200mA- 250 max working voltage | In Stock Ships in 5-10 Days |
| DB15M-15ScT | DB15M-15ScT Unshielded Screw Terminal Breakout with 15 Pin DSUB Connection | Call |
| DIN-BNC | National Instruments DIN-BNC DIN Rail-Mountable BNC Adapter | Call |
| EMI Suppression Ferrite | National Instruments EMI Suppression Ferrite- 5.1, 10.2, or 13.4 mm sizes | Call |
| ER-16 | National Instruments ER-16- 10 ms operate time, 5 ms release time | In Stock Ships Today |
| ER-8 | National Instruments ER-8 Relay- 5 ms release time | In Stock Ships Today |
| EXM-GPIB | National Instruments EXM-GPIB Board- 24-pin connector | Call |
| FD-11940 | NI FD-11940- compatible with FD-11613 and FD-11614 | Call |
| FD-11950 | National Instruments FD-11950- 4 A max. current | Call |
| FD-11951 | National Instruments FD-11951- 60 V rated voltage | Call |
| FD-11952 | National Instruments FD-11952 M12 Male Straight Connector | Call |
| FD-11953 | FD-11953 Field Serviceable Connector with 8 Pins | Call |
| HDD-8263 | National Instruments HDD-8263 1U Chassis | In Stock Ships in 5-10 Days |
| HDD-8265 | National Instruments HDD-8265 RAID Array- 750 MB/s | Call |
| HDD-8266 | National Instruments HDD-8266- 3.6 GB/s | Call |
| IMAQ-A6804 | IMAQ-A6804, 4 BNC Connector, 68 Pin VHDCI Connector, 1 m, Vision Products Cable | In Stock Ships Today |
| IP67 Power Supply | National Instruments IP67 Power Supply- 8 A or 5 A output current | In Stock Ships in 5-10 Days |
| MCA-7790M | National Instruments MCA-7790M- 5 LEDs | Call |
| MCA-7790P | National Instruments MCA-7790P- 3 LEDs | In Stock Ships Today |
| MCA-7790Y | National Instruments MCA-7790Y- 24 V power supply | Call |
| MKD-1117 | NI MKD-1117, 100 to 240 VAC, 17 Inch LCD Monitor, Rack Mountable Monitor and Keyboard Drawer | In Stock Ships Today |
| NEMA L6-20P | NEMA L6-20P Power Cord that is 2.5 Meters Long | Call |
| NI Instrument Simulator | National Instruments NI Instrument Simulator- connects to E Series & 50 pin MIO boards | In Stock Ships Today |
| NI-9901 | NI-9901 Desktop Mounting Kit with 2 Adapter and 2 End Brackets | In Stock Ships Today |
| NI-9918 | National Instruments NI-9918- compatible with CompactDAQ and CompactRIO Chassis | Call |
| NI-9921 | National Instruments NI-9921- can house 1 WLS-9xxx device | Call |
| NI-9922 | National Instruments NI-9922 Wi-Fi and Ethernet UP Enclosure Kit provides a minimum IP 54 protection | Call |
| NI-9927 | National Instruments NI-9927- compatible with NI-9474 module | In Stock Ships Today |
| NI-9928 | NI-9928 Backshell Kit- for use with NI-9266 and NI-9252 | Call |
| NI-9931 | NI-9931 Screw-Terminal Accessory | Call |
| NI-9933 | NI-9933 37-Pin D-Sub Connector Kit | Call |
| NI-9934 | National Instruments NI-9934 25-Pin D-SUB Connector | In Stock Ships Today |
| NI-9939 | National Instruments NI-9939- compatible with 16-position spring terminal or screw terminal connector blocks | In Stock Ships Today |
| NI-9940 | National Instruments NI-9940- compatible with NI-9375 | In Stock Ships Today |
| NI-9944 | NI-9944 Quarter Bridge Completion Accessory with 120 Ohm | Call |
| NI-9949 | National Instruments NI-9949- compatible with NI-9237 and SCXI-1314T | In Stock Ships Today |
| NI-9971 | National Instruments NI-9971- quantity 4 backshell units included | Call |
| NI-9972 | National Instruments NI-9972- includes 4 backshells | In Stock Ships in 5-10 Days |
| NI-9979 | National Instruments NI-9979 Strain Relief Clamp | Call |
| NI-9981 | National Instruments NI-9981 Backshell Connector Kit | Call |
| PC-MF4-PT | National Instruments PC-MF4-PT Power Cable | Call |
| PC-MF4-Y | PC-MF4-Y Microfit Power Y-Adapter that is 0.2 Meters | Call |
| PS-OP01 | National Instruments PS-OP01- compatible with the CC5002X | Call |
| PS-OP02 | National Instruments PS-OP02- BNC connectors | Call |
| PXI Filler Panel | NI PXI Filler Panel- designed for PXI Chassis | In Stock Ships Today |
| PXI Slot Blocker | National Instruments PXI Slot Blocker Kit, qty 5 | In Stock Ships Today |
| PXI-1045 Rackmount Kit | National Instruments Front and Rear Rack Mount Accessory for PXI-1045 Chassis | Call |
| PXI-CardBus8310 | National Instruments PXI-CardBus8310 Interface Kit | In Stock Ships Today |
| PXIe-4163 | NI PXIe-4163 PXI Source Measure Unit with 62-Pin DSUB I/O Connector | Call |
| REM-11180 | National Instruments REM-11180 Bus Coupler for Remote I/O | Call |
| SA-413T | SA-413T Triaxial Adapter with 1 Screw Terminal | Call |
| SA1000X | National Instruments SA1000X- 10 X attenuation | Call |
| SA1500X | National Instruments SA1500X Probe with -8 V to 8 V voltage range | Call |
| SA2500X | National Instruments SA2500X- 1.3 m cable length | Call |
| sbRIO-9695 | sbRIO-9695 sbRIO-9695 Heat Spreader Thermal Kit for sbRIO Modules | Call |
| SCB-100A | National Instruments SCB-100A- designed for 100-pin digital I/O modules and devices | In Stock Ships Today |
| SCB-19 | National Instruments SCB-19- H19 and screw terminal connectors | In Stock Ships Today |
| SCB-68 | National Instruments SCB-68 Terminal Block- CJC temperature sensor included | In Stock Ships Today |
| SCB-68 HSDIO | SCB-68 HSDIO Shielded I/O Connector Block with 68 Pin VHDCI and 72 Screw Terminals | Call |
| SCC-LP05 | National Instruments SCC-LP05 Lowpass Filter Module | Call |
| SCXI-1371 | SCXI-1371 Rack Mount Kit with 4 Slots | Call |
| SCXI-1382 | SCXI-1382 12 V Battery Pack for the SCXI-1000DC Chassis | Call |
| Serial DTE TO DCE | Serial DTE TO DCE Adapter with RS-232 Interface | In Stock Ships Today |
| SMA-2164 | National Instruments SMA-2164- 44 resistors | In Stock Ships Today |
| SMA-2165 | National Instruments SMA-2165- 5 V maximum voltage | Call |
| SMA-SMA-SMA T Connector | National Instruments SMA-SMA-SMA T Connector- 0 to 10 GHz measure frequency | Call |
| SMA-SMB Adapter | National Instruments SMA-SMB Adapter- 0 GHz to 4 GHz measure frequency | Call |
| SMB-2145 | National Instruments SMB-2145- 5.5 V maximum voltage rating | Call |
| SMB-2146 | National Instruments SMB-2146- designed for the NI-5752 | Call |
| SMB-2147 | National Instruments SMB-2147- designed for the NI-5751 | Call |
| SMB-2148 | National Instruments SMB-2148- 1.2 ns typical propagation delay | Call |
| SMB-2153 | National Instruments SMB-2153 Breakout Box Accessory | Call |
| SMB-2163 | National Instruments SMB-2163- one 68-pin DDC connector | In Stock Ships Today |
| SP200B | NI SP200B- 10 X, 1 X attenuation | In Stock Ships Today |
| SP500C | NI SP500C- voltage range from-300 V to 300 V | Call |
| SP500X | NI SP500X- single-ended passive probe | Call |
| Starter Kit for ISC-178X Smart Cameras | National Instruments Starter Kit for ISC-178X Smart Cameras | Call |
| UES-3880 | UES-3880 IEEE802.3/802.3u/802.3x Smart Ethernet Switch | In Stock Ships Today |
| USB-1357 | National Instruments USB-1357- USB 2.0 full-speed | Call |
| USB-1358 | National Instruments USB-1358- compatible with the SCXI-1127/1128/1129 and SCXI-1175 modules | Call |
| USB-1359 | National Instruments USB-1359- 300 Vrms or VDC maximum voltage | In Stock Ships Today |
| USB-6008/09 | National Instruments USB-6008/09 Prototyping Circuit Accessory | Call |
| WSN-3283 | National Instruments WSN-3283 Panel Mount Plate | Call |
| 763000-01 | National Instruments 763000-01- 2.3 m | Call |
| 763064-01 | National Instruments 763064-01- AC, 2.5 m Power Cord | Call |
| 763065-01 | National Instruments 763065-01- 10 A maximum current | Call |
| 763066-01 | National Instruments 763066-01- 2.5 m IEC Power Cord | Call |
| 763067-01 | National Instruments 763067-01- 2.5 meter cable length | Call |
| 763068-01 | National Instruments 763068-01- 3 m | Call |
| 763634-01 | National Instruments 763634-01- 2.29 m | Call |
| 763830-01 | National Instruments 763830-01- 15 A maximum current | Call |
| 776844-01 | 776844-01 SCB-68 Shielded I/O Connector Block with 16 Bit Resolution | Call |
| 776990-01 | 776990-01, 100 Pin Female Connectors, SCB-100 Shielded I/O Connector Block | Call |
| 777080-01 | 777080-01 ER-8 Electromechanical Relay with 8 Relays | Call |
| 777081-01 | 777081-01 ER-16 Electromechanical Relay with 16 Isolated SPDT Channels | Call |
| 777145-01 | 777145-01 CB-68LP Connector Block with 68 Screw Terminals | Call |
| 777145-02 | National Instruments 777145-02 Connector Block | Call |
| 777664-01 | 777664-01 Configurable Signal Conditioning Enclosure | Call |
| 777687-70 | National Instruments 777687-70 Rack-Mount Kit | Call |
| 777687-71 | 777687-71 SCXI-1371 Rack-Mount Kit with 6 Position Brackets | Call |
| 778747-01 | National Instruments 778747-01 Single-Ended Digital I/O Accessory | Call |
| 778948-01 | NI 778948-01 Rack-Mount Kit | In Stock Ships in 5-10 Days |
| 779556-01 | 779556-01 BNC-2090A Multifunction DAQ Accessory with 16 Channels | Call |
| 779567-01 | 779567-01 NI-9940 Backshell Connector Block Kit | Call |
| 780553-01 | NI 780553-01 C Series CAN Cable Kit | Call |
| 780910-01 | NI 780910-01- PXI-103x Chassis Fan Replacement Kit | Call |
| 780986-01 | National Instruments 780986-01- compatible with NI-9231 module | Call |
| 781482-01 | NI 781482-01- for use with the PXI-103x and PXIe-107x Chassis | Call |
| 781587-01 | NI 781587-01- K-type calibration | Call |
| 781620-01 | National Instruments 781620-01 RAID Array | Call |
| 782066-01 | NI 782066-01- for Basler ace GigE Vision Cameras | Call |
| 782290-01 | NI 782290-01- 2 A maximum current | Call |
| 782364-01 | NI 782364-01- 70 MHz-9 GHz range | Call |
| 782432-01 | National Instruments 782432-01 Source Measure Unit (SMU) | Call |
| 782444-01 | 782444-01 SCB-19 AUX I/O Connector Block that is Noise Rejecting | Call |
| 782536-01 | 782536-01, Noise Rejecting, 68 Pin SCB-68A Shielded I/O Connector Block | Call |
| 782573-01 | National Instruments 782573-01- 5 m cable with SMA | Call |
| 782715-01 | National Instruments 782715-01 Backshell Kit | Call |
| 783001-8192 | NI 783001-8192- for the PXIe-8840, PXI-8840, and PXIe-8821 | Call |
| 783198-01 | 783198-01 NI SCB-68 HSDIO with 35 mm DIN Rail | Call |
| 783422-01 | 783422-01 HDD-8266 RAID Array with 24 Ports | Call |
| 784257-01 | 784257-01 SA2500X Active Oscilloscope Probe with 2.5 GHz Bandwidth | Call |
| 784300-01 | NI 784300-01- for use with the NI-9246 and NI-9247 | Call |
| 784306-01 | 784306-01 CDA-2990 Clock Distribution Device with 8 Channels | Call |
| 784307-01 | 784307-01 CPS-8910 Cabled PCIE Switch Box with 10 Ports | Call |
| 784634-01 | National Instruments 784634-01- compatible with NI-793XR Series | Call |
| 784685-01 | National Instruments 784685-01- 2.5 m, 10 A current | Call |
| 784686-01 | National Instruments 784686-01- 2.5 m | Call |
| 785024-01 | 785024-01 SCB-100A Shielded I/O Connector Block with 100 Screw Terminals | Call |
| 785082-01 | 785082-01 NI-9939 Backshell Kit with Spring Terminals | Call |
| 785125-01 | NI 785125-01- 5 A maximum current | Call |
| 785562-01 | 785562-01 CC30100X Oscilloscope Probe with 100 MHz | Call |
| 785626-01 | National Instruments 785626-01- AC Power Cord | Call |
| 785628-01 | NI 785628-01- for use with the NI-9210 module | Call |
| 785699-01 | National Instruments 785699-01- 128 GB maximum | Call |
| 785701-01 | National Instruments 785701-01- Replacement for the HPE 240 GB SSD | Call |
| 786162-01 | 786162-01 NI-9972 Backshell Strain Relief Kit For 6-Position Connector Blocks | Call |
| 786377-01 | National Instruments 786377-01- 12 A maximum current | Call |
| 786847-01 | 786847-01 CC05120X Oscilloscope Probe | Call |
| 786848-01 | National Instruments 786848-01 Oscilloscope Probe | Call |
| 786849-01 | National Instruments 786849-01 Oscilloscope Probe | Call |
